Aperçu du produit
UV-intLED150 UVLED specialized UV energy meter is a high-quality UV energy measurement instrument specially optimized for LED ultraviolet light sources.
This energy meter adopts LED specialized design with spectral measurement range of 350-430 nanometers, suitable for LED 365nm-410nm universal wavelengths, specifically designed for UVLED curing equipment energy measurement.
The main sensor is located on the back of the meter, measurement results can be directly read on the front display screen (unit: millijoules/square centimeter), uses 3.6V lithium battery, can last about 10000 hours.
Spécifications techniques
| Modèle de produit | UV-intLED150 (UVLED Specialized Model) |
|---|---|
| Taille du produit | Diameter 90mm × Height 12mm |
| Test Intensity Range | 0-10000 mw/cm² (Not displayed) |
| Display Energy Range | 0-999999 mj/cm² (6-digit display) |
| Spectral Plage de mesure | 350-430 nanometers |
| LED Wavelength Adaptation | LED 365nm-410nm Universal |
| Résistance à la température | 110℃/10 seconds |
| Power Type | 3.6V Lithium Battery |
| Battery Life | Can last about 10000 hours |
| Matériau du boîtier | Aluminum housing |
| Poids du produit | Approximately 150 grams |
Caractéristiques du produit
LED Specialized Design
Specially optimized for LED ultraviolet light sources, spectral range 350-430 nanometers
Mesure de haute précision
Accurate LED ultraviolet energy measurement, ensures LED process quality stability
Autonomie ultra-longue
Uses 3.6V lithium battery, can last about 10000 hours
High Résistance à la température
Temperature resistance 110℃, not exceeding 10 seconds on conveyor belts
Domaines d'application
UV-intLED150 UVLED specialized UV energy meter is widely used in the following LED ultraviolet application scenarios:
- UVLED curing processes - Energy measurement for LED ultraviolet curing equipment
- LED exposure equipment - Process control for LED exposure machines
- LED light source testing - Performance testing for LED ultraviolet light sources
- LED process optimization - Optimization adjustment for LED ultraviolet process parameters
- LED equipment matching - Matching detection for LED ultraviolet equipment
Certified by National Institute of Metrology calibration report
Safety Precautions
- Do not look directly at UV lamps or observe through refraction/reflection
- Ensure no part of the body is directly exposed to UV lamps
- This UV energy meter can withstand high temperatures, not exceeding 10 seconds on conveyor belts
- Ensure the device is within normal operating temperature range during use
Installation & Operation
- Turn ON the switch, LCD display shows zero
- Place the UV energy meter near the UV lamp source, try to align its back toward the light source (since the energy sensor is on the back), extend exposure time appropriately
- Wait until the display shows measurement results, for example 800 millijoules/square centimeter (800mj/cm²)
- Turn OFF the energy meter switch, or reset the display value to zero
Produits connexes
Recommended models: UV-int150 | UV-int140 | UV-int159 | UV-int160