Product Overview
UV-int158 Standard UV Energy Meter is a high-quality UV energy measurement instrument specifically designed for industrial UV process measurement.
This energy meter adopts large size design with auto-off function and front self-calibration capability, suitable for various UV curing equipment energy measurement.
The main sensor of the measuring instrument is located on the back of the instrument, with a measurement range of 250~410 nanometers. The measurement results can be directly read on the display screen on the front of the energy meter (unit: millijoules/square centimeter).
Technical Specifications
| Test Intensity Range | 0-10000 mw/cm² (not displayed) |
|---|---|
| Display Energy Range | 0-999999 mj/cm² |
| Spectral Measurement Range | 250-410 nm (optional customization: 350-460nm) |
| Product Size | Diameter: 120mm × Height: 12mm |
| Temperature Resistance | 110℃/10 seconds |
| Switch Control | ON/OFF | Auto-Off |
| Product Weight | Approximately 150g |
| Power Type | 1.5V AAA batteries (2 pieces, replaceable) |
| Power Consumption | 100μA, usable for about 1000 hours |
| Shell Material | Aluminum alloy/Anodized |
Product Features
Large Size Design
Diameter 120mm large size design, easy to operate and read
Auto-Off Function
Intelligent auto-off function saves battery power
Front Self-Calibration
Front self-calibration capability for user convenience
High Precision Measurement
Accurate UV energy measurement ensures stable process quality
Application Areas
UV-int158 Standard UV Energy Meter is widely used in the following areas:
- Industrial UV Process - UV energy measurement for UV curing equipment
- Quality Control - Quality control of ultraviolet curing process
- Process Optimization - Optimization and adjustment of UV process parameters
- Equipment Maintenance - Maintenance testing of UV curing equipment
- Scientific Research - Measurement for ultraviolet-related scientific experiments
Safety Precautions
- Do not look directly at UV lamps or observe them through refraction/reflection
- Ensure that no part of the body is directly exposed to UV lamps
- This UV energy meter can withstand high temperatures, not exceeding 10 seconds on conveyor belts
- Ensure the device is within normal operating temperature range during use
Installation and Operation
- Turn ON the switch, the LCD display will show zero
- Place the UV energy meter near the UV lamp source, try to align its back to the light source (because the energy sensor is on the back), extend the exposure time appropriately
- Until the display shows measurement results, for example 800 millijoules/square centimeter (800mj/cm²)
- Turn OFF the energy meter switch (OFF), or reset the display value to zero
Related Products
Related models: UV-int150 | UV-int140